Mobilgrease XTC (16 Gal. Keg)
Specifically designed for high-speed and high-temperature gear and grid coupling applications, NLGI Grade 1 Mobilgrease XTC provides superior lubrication and protection, low bleed and high-temperature stability even in severe aqueous environments. The high viscosity mineral base oil and Extreme Pressure (EP) anti-wear additive combination in Mobilgrease XTC reduces friction wear from sliding tooth contact while also preventing rust and corrosion. Its excellent resistance to oil separation also helps reduce leakage. Mobilgrease XTC meets or exceeds the requirements of major coupling manufacturers covering a wide range of industries. This product fully meets existing AGMA Type CG-2 requirements for high-speed flexible gear and grid couplings, as well as AGMA Type CG-1 requirements. The exceptional anti-wear protection of Mobilgrease XTC remains consistent in ambient temperatures up to 248 degrees F (120 degrees C).
The Mobilgrease brand of products is well known and highly regarded world-wide based on their outstanding performance in addition to global technical support that stands behind Mobil Industrial Lubricants. The outstanding qualities of Mobilgrease XTC have made it the choice of many users, especially when performance is a key concern.
Mobilgrease XTC enjoys an excellent reputation in the lubrication of high speed and high temperature gear and grid coupling applications. Close contacts with original equipment manufacturers (OEMs) and end-users ensure that products such as Mobilgrease XTC will be available to meet critical application needs, both now and in the future.
Mobilgrease XTC was specifically designed for high speed and high temperature coupling applications, and offers the following advantages and potential benefits:
|Features||Advantages and Potential Benefits|
|Excellent resistance to oil separation||Helps reduce leakage, helping improve reliability and coupling protection|
|Excellent EP / Antiwear protection||Helps reduce coupling wear, even when misaligned helping to lower maintenance costs|
|Excellent high temperature stability||Long grease life and helping to extend intervals between relubrication|
|Good resistance to rust and corrosion||Maintains excellent grease performance even in tough aqueous environments|
Application Considerations: Because Mobilgrease XTC is highly viscous and has adhesive agents to address coupling demands, use of hand-operated grease guns at low ambient temperatures without auxiliary heat is discouraged.
Mobilgrease XTC fully meets existing AGMA Type CG-2 requirements for high-speed flexible gear and grid couplings. Mobilgrease XTC also meets less demanding AGMA Type CG-1 requirements. Mobilgrease XTC maintains its excellent performance characteristics in ambient temperatures up to 120º C. It is not recommended for temperatures below -30º C. Mobilgrease XTC is used widely in industrial applications requiring the use of:
- Grid-type flexible couplings
- Gear-type flexible couplings
|Mobilgrease XTC meets or exceeds the requirements of:|
|Meets AGMA CG-1|
|Meets AGMA CG-2|
|Color, Visual||Dark Brown|
|Penetration, Worked, 25º C, ASTM D 217||325|
|Dropping Point, ºC, ASTM D 2265||215|
|Viscosity of Oil, ASTM D 445|
|cSt @ 40º C||680|
|Centrifugal Bleed, ASTM D 4425, K36, 24 hrs, 38º C, vol %||0|
|Penetration change, ASTM D 217, from 60X to 10,000X, mm/10||+25|
|Bomb Oxidation, ASTM D 942, Pressure drop at 100 hrs, kPa||35|
|Four- Ball Wear, ASTM D 2266||0.35|
|Four- Ball EP Test, ASTM D 2596, Weld Point, Kg Load Wear Index, Kgf||315 51|
|Timken OK Load, ASTM D 2509, lb||60|
|Corrosion Prevention, ASTM D 1743||Pass|
|Copper Strip Corrosion, ASTM D 4048||1A|