Mobilgrease XHP 462 (Case - 10 Tubes)

SKU

XOM121925

$35.50

Mobilgrease 462 is extreme pressure grease designed for heavily loaded applications which require superior adhesion and robust film strength on slower, and rolling heavy loaded grease points. This grease has excellent water washout properties and provides excellent protection against rust and corrosion. Mobilgrease XHP 462 has premium adhesive and cohesive properties making it an excellent choice for extreme loads, especially rolling, and sliding applications and also for extended service intervals between greasing. XHP462 is Lithium Complex grease using ISO460 base oil.

Product Data Sheet

Features

Mobilgrease XHP 460 greases are leading members of the Mobilgrease brand of products. Mobilgrease XHP 460 greases are designed by our formulation technologists and backed by our world-wide technical support staff.

A key factor in the excellent adhesion and cohesion properties and mechanical stability of the thickener of Mobilgrease XHP 460 greases is the proprietary manufacturing technology developed at our research facilities and adopted by our modern manufacturing facilities. These products use specially selected additives to provide excellent oxidation stability, rust and corrosion control, resistance to water contamination as well as anti-wear and EP protection. Mobilgrease XHP 460 Series products offer the following features and potential benefits:

Features	Advantages and Potential Benefits
Superb resistance to water washout and spray-off	Helps to assure proper lubrication and protection even in the most severe water exposure conditions
Highly adhesive and cohesive structure	Excellent grease tenacity helps reduce leakage and extend re-lubrication intervals to help reduce maintenance requirements.
Excellent rust and corrosion resistance	Protection of lubricated parts even in hostile aqueous environments.
Very good resistance to thermal, oxidative and structural degradation at high temperature	Helps extend grease life and enhance bearing protection in high temperature applications and offers reduced maintenance and replacement cost benefits.
Very good anti-wear and EP performance	Reliable protection of lubricated equipment, even under conditions of high sliding with potential for extended equipment life and reduced unanticipated downtime
Broad multi-purpose application	Provides potential for inventory rationalization and reduced inventory costs

Applications

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles.

Specific applications:

Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings.
Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment.
Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

Specifications

Mobilgrease XHP 460 Series meets or exceeds the requirements of	461	462	462 Moly
DIN 51825: (2004-06)	KP1N-20L	KP2N-20L	--

Typical Properties

Mobilgrease XHP	461	462	462 Moly
NLGI Grade	1	2	2
Thickener Type	Li-Complex	Li-Complex	Li-Complex
Color, Visual	Dark Blue	Dark Blue	Grey
Molybdenum Disulfide, wt%,	--	--	3%
Penetration, Worked, 25º C, ASTM D 217	325	280	280
Dropping Point, ºC, ASTM D 2265	280	280	280
Viscosity of Oil, ASTM D 445
cSt @ 40º C	460	460	460
4-Ball Wear Test, ASTM D 2266, scar, mm	0.50	0.50	0.50
4-Ball Weld Load, ASTM D 2509, Kg	315	315	315
Timken OK Load, ASTM D 2509, lb	50	50	50
Bomb Oxidation, ASTM D 942, Pressure drop at 100 hrs, kPa (psig)	13.8 (2)	13.8 (2)	--
Corrosion Prevention, ASTM D 1743	Pass	Pass	Pass
Rust Protection (EMCOR), IP 220-mod/ASTM D 6138., Distilled Water	0,0	0,0	0,0
Copper Strip Corrosion, ASTM D 4048	1a	1a	1a
Penetration Consistency Change, Roll Stability, ASTM D 1831, mm/10	-5	-5	-5