Mobilgrease XHP 461 (Case - 10 Tubes)
Mobilgrease XHP 461 is extreme pressure grease designed for heavily loaded applications which require superior adhesion and robust film strength on slower, and rolling heavy loaded grease points. This grease has excellent water washout properties and provides excellent protection against rust and corrosion. Mobilgrease XHP 461 has premium adhesive and cohesive properties making it an excellent choice for extreme loads, especially rolling, and sliding applications and also for extended service intervals between greasing. Mobilgrease XHP 461 is a Lithium Complex grease using ISO 460 base oil.
Mobilgrease XHP 460 greases are leading members of the Mobilgrease brand of products. Mobilgrease XHP 460 greases are designed by our formulation technologists and backed by our world-wide technical support staff.
A key factor in the excellent adhesion and cohesion properties and mechanical stability of the thickener of Mobilgrease XHP 460 greases is the proprietary manufacturing technology developed at our research facilities and adopted by our modern manufacturing facilities. These products use specially selected additives to provide excellent oxidation stability, rust and corrosion control, resistance to water contamination as well as anti-wear and EP protection. Mobilgrease XHP 460 Series products offer the following features and potential benefits:
|Features||Advantages and Potential Benefits|
|Superb resistance to water washout and spray-off||Helps to assure proper lubrication and protection even in the most severe water exposure conditions|
|Highly adhesive and cohesive structure||Excellent grease tenacity helps reduce leakage and extend re-lubrication intervals to help reduce maintenance requirements.|
|Excellent rust and corrosion resistance||Protection of lubricated parts even in hostile aqueous environments.|
|Very good resistance to thermal, oxidative and structural degradation at high temperature||Helps extend grease life and enhance bearing protection in high temperature applications and offers reduced maintenance and replacement cost benefits.|
|Very good anti-wear and EP performance||Reliable protection of lubricated equipment, even under conditions of high sliding with potential for extended equipment life and reduced unanticipated downtime|
|Broad multi-purpose application||Provides potential for inventory rationalization and reduced inventory costs|
Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles.
- Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings.
- Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment.
- Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.
|Mobilgrease XHP 460 Series meets or exceeds the requirements of||461||462||462 Moly|
|DIN 51825: (2004-06)||KP1N-20L||KP2N-20L||--|
|Mobilgrease XHP||461||462||462 Moly|
|Color, Visual||Dark Blue||Dark Blue||Grey|
|Molybdenum Disulfide, wt%,||--||--||3%|
|Penetration, Worked, 25º C, ASTM D 217||325||280||280|
|Dropping Point, ºC, ASTM D 2265||280||280||280|
|Viscosity of Oil, ASTM D 445|
|cSt @ 40º C||460||460||460|
|4-Ball Wear Test, ASTM D 2266, scar, mm||0.50||0.50||0.50|
|4-Ball Weld Load, ASTM D 2509, Kg||315||315||315|
|Timken OK Load, ASTM D 2509, lb||50||50||50|
|Bomb Oxidation, ASTM D 942, Pressure drop at 100 hrs, kPa (psig)||13.8 (2)||13.8 (2)||--|
|Corrosion Prevention, ASTM D 1743||Pass||Pass||Pass|
|Rust Protection (EMCOR), IP 220-mod/ASTM D 6138., Distilled Water||0,0||0,0||0,0|
|Copper Strip Corrosion, ASTM D 4048||1a||1a||1a|
|Penetration Consistency Change, Roll Stability, ASTM D 1831, mm/10||-5||-5||-5|