Univis HVI oils provide outstanding viscosity control over a wide temperature range. Their excellent oxidation resistance allows extension of oil and filter change intervals while assuring clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in exceptional equipment performance that not only results in fewer breakdowns but helps improve production capacity. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.

The Univis HVI oils provide the following benefits:

  • Unusually high viscosity index and excellent viscosity control characteristics improves machine accuracy and reduces torque
  • Very low pour points maintains excellent fluidity conditions at low temperatures
  • Suitable for use in hydraulic equipment operating in very cold conditions, such as cold stores and mobile equipment operating in very cold climates
  • High performance and smooth hydraulic operations derived from uniform viscosity control, fast air release, very good foam control and good water separability
  • Exceptional rust and corrosion protection reduces the negative effects of moisture on system components
  • Effective oxidation stability reduces deposits and improves valve performance


  • Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range
  • Hydrostatic transmissions and dash pots
  • They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated
  • To reduce deposit formation in equipment where close clearance servo-valves are used
  • Systems where cold start-up and high operating temperatures are typical
  • Systems requiring a high degree of load-carrying capability and anti-wear protection
  • Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

Typical Properties

Univis HVI Univis HVI 13 Univis HVI 26
ISO Viscosity Grade
Viscosity, ASTM D 445
cSt @ 40ºC 13.5 25.8
cSt @ 100ºC 5.3 9.3
Viscosity Index, ASTM D 2270 404 376
Kinematic Viscosity @ -40ºC, ASTM D 445, cSt 371 896
Copper Strip Corrosion, ASTM D 130 1A 1A
Pour Point, ºC, ASTM D 97 -60 -60
Flash Point, ºC, ASTM D 92 101 103


There are no reviews for this item. Write Review


Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Why did you choose this?
The Lubricant Store Store
As per our repair person, it was required for the overhaul of our press brakes.
Bradley M on Mar 5, 2020
As per our repair person, it was required for the overhaul of our press brakes.
Bradley M on Mar 5, 2020