Mobil Teresstic 100 (5 Gal. Pail)
Mobil Teresstic 100 is a long-service-life circulating oil made from selected base stocks and highly effective additives. These additives provide a number of benefits, including oxidation and rust inhibitors and anti-foam agents.
Mobil Teresstic 100 is recommended for applications where a dependable lubricant is needed for very long periods, sometimes years. It resists high temperatures, prevents rust, and shed entrained water and air. It provides excellent performance in hydraulic systems, circulating lubrication systems, gear cases, bearings, reciprocating natural gas compressors, and other industrial units where long trouble-free service is needed.
Demulsibility – As water is perhaps the major menace to effective lubrication, it is essential that industrial circulating oils exhibit good demulsibility. All TERESSTIC grades shed water readily and are highly resistant to emulsification. These properties promote water separation in the reservoir, thus keeping it from recirculating with the oil. TERESSTIC oils (ISO VGs 32 - 100) typically provide separation times of 15 minutes or less on the standard ASTM D 1401 Demulsibility Test.
Foam Resistance and Air Release – The trend toward shorter residence time for oils in reservoirs makes it essential that industrial circulating oils resist foaming and readily eliminate entrained air. All TERESSTIC grades contain foam inhibitors.
Rust and Corrosion Protection – TERESSTIC oils are formulated with rust inhibitors. Grades 32 through 100 pass both distilled and salt water versions of ASTM D 665. The heavier grades are tested in the distilled water version only. The TERESSTIC line also passes the ASTM copper strip corrosion test, assuring protection of copper and bronze.
In summary, TERESSTIC circulating oils offer the following features and benefits:
- Excellent demulsibility
- Well balanced foam resistance and air release
- Rust- and oxidation-inhibited
- Long service life
- Excellent high-temperature stability
- For mild duty turbines, hydraulic systems, circulating systems, gear cases, heat transfer systems, and reciprocating natural gas compressors
- Complete range of ISO viscosity grades for all requirements
TERESSTIC oils are recommended for applications that require dependable lubrication for extended service periods – often for years. They effectively resist high temperatures, prevent rust, and shed entrained water and air. TERESSTIC oils give outstanding performance in hydraulic systems, circulating lubrication systems, gear cases, bearings, reciprocating natural gas compressors, and other industrial units, where a RandO lubricant is required, for which long trouble-free service is required.
Contamination of TERESSTIC oils with other products such as detergent motor oils may substantially impair their quality and could lead to operational problems such as foaming, filter plugging and sludge formation
|ISO viscosity grade||32||46||68||-||100||150||220||320||460|
|Viscosity, ASTM D 445|
|cSt @ 40°C||32.0||46.0||68.0||77.0||100||150||220||320||460|
|cSt @ 100°C||5.3||6.6||8.5||9.3||11.1||14.5||18.8||24.0||30.4|
|Viscosity Index, ASTM D 2270||96||95||95||95||95||95||95||95||95|
|Pour point, °C (°F), ASTM D 97||-21(-6)||-12 (10)||-12(10)||-12 (10)||-12(10)||-12(10)||-12(10)||-12(10)||-12(10)|
|Emulsion, Time to 3 ml Emulsion, 54°C, ASTM D 1401||15||15||20||20||-||-||-||-||-|
|Emulsion, Time to 3 ml Emulsion, 82°C, ASTM D 1401||-||-||-||-||15||30||30||30||30|
|Copper Strip Corrosion, 3 hours, 100°C, ASTM D 130||1B||1B||1B||1B||1B||1B||1B||1B||1B|
|Neutralization Number, ASTM D 974||0.06||0.06||0.06||0.06||0.06||0.20||0.06||0.06||0.06|
|Rust Prevention, ASTM D 665A||Pass||Pass||Pass||Pass||Pass||Pass||Pass||Pass||Pass|
|Rust Prevention, ASTM D 665B||Pass||Pass||Pass||Pass||Pass||-||-||-||-|