Mobil Sawguide Oil 100 (55 Gal. Drum)
Mobil Sawguide Oil 100 is specially engineered to meet the lubrication requirements of the thin saw blades of modern gang saws and edgers. Formulated with unique tackiness additives to reduce the amount of oil thrown off the blades or blown off by air/water sprays, Mobil Sawguide Oil 100 forms a highly effective friction-reducing film between the blade and the guide, decreasing wear and lowering operating temperature, in turn reducing cooling-water requirements. This product contains a potent anti-rust additive to protect blade surfaces from rust that could otherwise stain lumber surfaces. Mobil Sawguide Oil optimizes lubricant solvency to reduce buildup of pitch, or wood resin, on the blade, while adhering to blade and guide surfaces to provide reliable protection against damaging metal-to-metal contact.
Features
MOBIL SAWGUIDE OIL offers the following features and benefits:
| Features | Benefits |
| Forms a highly effective friction-reducing film between the blade and the guide. This reduces operating temperature, which, in turn, reduces cooling-water requirements. | Drier sawdust |
| The buildup of pitch, or wood resin, on the blade and sawguide increases friction and accelerates wear. MOBIL SAWGUIDE OIL is uniquely formulated to reduce and control pitch buildup by optimizing lubricant solvency. | Provides outstanding control of friction and wear |
| Clings tenaciously to blade and guide surfaces, reliably protecting against the damaging metal-to-metal contact that causes wear. | Superb wear protection |
| Contains a potent anti-rust additive to protect blade surfaces from rust that would otherwise stain lumber surfaces. | Protects against rust |
| Formulated with tackiness additives that reduce the amount of oil thrown off the blades or blown off by air/water sprays. | Controls stray mist |
Applications
MOBIL SAWGUIDE OIL is specially formulated to meet the lubrication requirements of modern gang saws and edgers.
Typical Properties
| MOBIL SAWGUIDE OIL | 100 |
| Color | 1.0 |
| Flash Point, °C | 219 |
| Density @ 15°C, kg/l | 0.882 |
| Kinematic Viscosity | |
| cSt @ 40°C | 100 |
| cSt @ 100°C | 11.8 |
| Pour Point, °C | -24 |
| Free Water, ppm | |
| @ 54°C | 37 |
| @ 82°C | - |
| Rust Prevention | Pass |
| Falex Wear, mg (low load, 600 lb for 2.5 hr) | 16 |
