Mobil Delvac Extreme 10W30 (Case of 4 - 1 Gal. Containers)
Mobil Delvac Extreme 10W-30 CK-4 is a premium synthetic blend, high-performance diesel engine oil that helps extend engine life while providing long drain capability for modern diesel engines operating in extreme conditions. Meeting or exceeding the requirements of API CK-4, CJ-4, CI-4 PLUS and CH-4, Mobil Delvac Extreme 10W-30 CK-4 is intended for use in a variety of heavy-duty applications and operating environments, even for engines under heavy loads. Specific applications include on-highway light- and heavy-duty trucking; modern high-performance diesel engines with exhaust gas recirculation (EGR); naturally aspirated and turbocharged diesel-powered engines; and off-highway industries such as mining, quarrying, agriculture and construction. Mobil Delvac Extreme 10W-30 CK-4 is also fully backward compatible, delivering superior performance in both newer and older heavy-duty engines. This product ensures exceptional oxidation stability and anti-wear protection, excellent soot and viscosity control, plus superior high- and low-temperature performance.
Mobil Delvac Extreme is formulated with a blend of synthetic basestocks and a boosted additive system tailored to deliver extended performance for up to two times beyond OEM recommended oil drain intervals1. The proprietary formulation delivers excellent wear protection, unsurpassed oxidation stability2, and outstanding TBN retention. Mobil Delvac Extreme FE also provides outstanding resistance to oil consumption, oxidation, corrosive and abrasive wear, and high temperature deposits.
Mobil Delvac Extreme 10W-30 has the potential to improve fuel economy2.
|Features||Advantages and Potential Benefits|
|Unsurpassed oxidation stability3||Superior performance in extreme conditions and extended ODI service.|
|Excellent soot and viscosity control||Greater engine efficiency, long engine life and long oil life|
|Excellent oil consumption control||Lower oil costs due to less make-up oil during operation|
|Outstanding TBN reserves||Corrosion protection and extended drain intervals for both new and old engines using up to 500 ppm sulfur diesel fuel|
|Low temperature fluidity and pumpability||Formulated for smooth starting in cold weather|
|Resistance to corrosive and abrasive wear||Long life of critical wear surfaces|
|Component compatibility||Long gasket and seal life|
|Meets demanding specifications of key diesel OEMs||One engine oil for mixed diesel fleets|
|Low ash formulation meeting API CK-4 and CJ-4 requirements||Long emissions aftertreatment life (DPF, DOC and SCR)|
1Results may vary based on vehicle/engine condition, driving and environmental conditions Consult OEM or ExxonMobil before implementing extended ODIs.
2Compared to an SAE 15W-40 conventional engine oil. Savings are dependent on vehicle engine type, outside temperature, driving conditions, and your current engine oil viscosity.
3Based on performance in the Volvo T-13 engine test
- Recommended for the latest heavy duty diesel engines operating in extreme conditions, including those equipped with aftertreatment systems and EGR.
- Recommended for diesel applications using older and naturally aspirated conventional designs.
- On-highway heavy-duty trucking and off-highway applications including trucking, mining, construction, agriculture and marine.
- On-highway applications operating in both high speed/high load and short haul pick-up/delivery service.
- Off-highway applications operating in severe low speed/heavy load conditions using up to 500 ppm sulfur fuels.
- Diesel-powered equipment from American, European and Japanese OEMs.
|Mobil Delvac Extreme meets or exceeds the requirements of:||15W-40||10W-30|
|API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4||X||X|
|ACEA E9, E7||X||X|
|Cummins CES 20086, 20081||X||X|
|Mobil Delvac Extreme is approved by the following OEMs:||15W-40||10W-30|
|Allison TES 439||X|
|Detroit Fluids Specification 93K222, 93K218||X||X|
|Deutz DQC II-10 LA||X||X|
|Deutz DQC III-10 LA||X|
|Mack EOS-4.5, EO-O Premium Plus||X||X|
|Renault Trucks RLD-4, RLD-3||X||X|
|MAN M 3575||X||X|
|Volvo VDS-4.5, VDS-4||X||X|
|Mobil Delvac Extreme|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||107.4||81.1|
|cSt @ 100ºC||14.3||11.8|
|Viscosity Index, ASTM D 2270||140||140|
|Density @ 15ºC kg/L, ASTM D 4052||0.872||0.867|
|Pour Point, ºC, ASTM D 97||-33||-42|
|Flash Point, ºC, ASTM D 92||221||219|
|Sulfated Ash, wt%, ASTM D 874||1||1|
|Total Base Number, mg KOH/g, ASTM D 2896||10.3||10.3|
|CCS, cP, ASTM D 5293||6100 @ -20C||6600 @ -25C|
|MRV, cP, ASTM D 4684||16900 @ -25C||18400 @ -30C|
|HTHS @ 150ºC, cP, ASTM D4683||4.1||3.6|