Mobil 1 Formula M 5W-40 (55 Gal. Drum)
Designed to ensure excellent engine cleaning power and wear protection, Mobil 1 Formula M 5W-40 is an advanced performance synthetic engine oil intended to lengthen the life of both diesel- and gasoline-powered automobiles that require an oil approved against Mercedes Benz MB-229.5 specification. Mobil 1 Formula M 5W-40 is created with a proprietary blend of high-performance components and quality synthetic base oils to reduce deposits and sludge build-up, lower oil consumption and provide exceptional low-temperature start-up. Mobil 1 Formula M 5W-40’s high viscosity index of 168 results in superior overall lubrication and wear protection for all driving styles and road conditions, from mild to severe.
Mobil 1 Formula M 5W-40 is made with a proprietary blend of high performance components and synthetic baseoils. It has been designed to help deliver outstanding overall performance and protection. Key features and potential benefits include:
|Features||Advantages and Potential Benefits|
|Active cleaning agents||Helps to reduce deposits and sludge build-up to enable long and clean engine life|
|Outstanding thermal and oxidation stability||Helps to reduce oil aging allowing extended drain interval protection|
|Low oil consumption||Less hydrocarbon pollution and less necessity to top-up|
|Excellent low temperature capabilities||Quick cold weather starting and fast protection. Also helps to extend engine life.|
|High Viscosity Index||Excellent overall lubrication and wear protection performance for all driving styles and conditions, from mild to severe.|
Mobil 1 Formula M 5W-40 is approved against Mercedes Benz MB-229.5.
- It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
|Mobil 1 Formula M 5W-40 has the following builder approvals:|
|Mobil 1 Formula M 5W-40|
|Viscosity (ASTM D445)|
|cSt @ 40ºC||79|
|cSt @ 100ºC||13.2|
|Sulphated Ash, wt% (ASTM D874)||0.90|
|HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683)||3.7|
|MRV @ -35 C , cP (ASTM D4684)||25,981|
|Total Base Number , mg KOH/g ( ASTM D2896)||8|
|Flash Point, ºC (ASTM D92)||228|
|Density @ 15.6 ºC, g/ml (ASTM D4052)||0.85|