Mobil 1 ESP X1 0w30 (Case - 6 Quarts)
Mobil 1 ESP X1 0w30 carries all of the claims of both Mobil 1 ESP M 5w40 and Mobil 1 ESP 0w30.
Mobil 1 ESP X1 0w30 is an advanced synthetic engine oil designed to meet the demands of both gasoline and diesel powered modern vehicles. It's excellent low temperature capabilites provide a quick start in cold weather and protect your engine from wear. It also protects your engine using active cleaning agents that reduce deposits and sludge build up, prolonging the life of your engine.
Mobil 1 ESP X1 0W-30 is made with a proprietary blend of leading edge components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's). Mobil 1 ESP X1 0W-30 has been designed to help deliver outstanding performance and protection in conjunction with potential fuel economy benefits. Key features and potential benefits include:
|Features||Advantages and Potential Benefits|
|Low Ash Content||Helps to reduce particulate build up in Diesel Particulate Filters|
|Low Sulfur and Phosphorous content||Helps to reduce poisoning of Gasoline Catalytic Converters|
|Active cleaning agents||Helps to reduce deposits and sludge build-up to enable long and clean engine life|
|Outstanding thermal and oxidation stability||Helps to reduce oil aging allowing extended drain interval protection|
|Low oil consumption||Less hydrocarbon pollution|
|Enhanced frictional properties||Potentially aids fuel economy|
|Excellent low temperature capabilities||Quick cold weather starting and ultra-fast protection Helps to extend engine life|
Mobil 1 ESP X1 0W-30 is recommended for many types of modern automobile engines, especially the high-performance gasoline and diesel engines found in the latest passenger cars, SUVs and light vans.
Mobil 1 ESP X1 0W-30 is especially suitable for extreme conditions, where conventional oil often may not perform. It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
|Mobil 1 ESP X1 0W-30 meets or exceeds the requirements of:|
|ACEA C2, C3||X|
|Mobil 1 ESP X1 0W-30 has the following builder approvals:|
|Mobil 1 ESP X1 0W-30|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||65.0|
|cSt @ 100ºC||12.0|
|Sulfated Ash, wt%, ASTM D 874||0.8|
|Density @15º C kg/l, ASTM D 4052||0.847|
|Total Base Number (TBN) ASTM D 2896||7.6|
|MRV at -30ºC||24,800|
|HTHS Viscosity, mPa•s @150ºC, ASTM D 4683||3.5|