Mobilith SHC PM 220 (Case - 10 Tubes)

SKU
XOM122122
$82.94
Mobil 122122 https://d2706ruq7qkfdn.cloudfront.net/media/catalog/product/cache/image/265x265/dd2dbd78acb262d17201d02bb7ab5f93/m/o/mobil_shc_mobilith_pm_220_13.7oz_front_09-23-15.png

Designed specifically for the most critical rolling element applications in peak performance paper machines, Mobilith SHC PM 220 is formulated to work even in extreme temperature environments and various water qualities. By combining the unique qualities of a lithium complex thickener with those of a synthetic base fluid, Mobilith SHC PM 220 supports low-temperature pumpability and lower starting/running torque times when compared to same-viscosity non-synthetic oil competitors. The result is a hardy solution that operates independent of temperature and water conditions while supporting structural stability and adhesion and protects against rust, acid, wear and alkali water corrosion.

Product Data Sheet

The Mobil SHC brand of oils and greases is recognized and appreciated for their innovation and outstanding performance. The Mobilith SHC series symbolizes our continued commitment to using advanced technology to provide outstanding products. A key factor in the development of Mobilith SHC PM greases was the close contacts between our scientists and application specialists with key paper machine designers to ensure that our product offerings would provide exceptional performance in this continually evolving, and increasingly severe, equipment area.

Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobilith SHC PM greases. These benefits include excellent resistance to acidic and alkaline water, enhanced bearing protection and bearing life, wide temperature range of application, and longer grease life.

To combat high thermal exposure our product formulation scientists chose proprietary synthetic base oils for Mobilith SHC PM grease because of their exceptional thermal and oxidative resistance. Our scientists developed a high performance lithium complex thickener technology and used specific additives to enhance Mobilith SHC PM greases to meet the needs of modern and future paper machines. Mobilith SHC PM greases offer the following features and benefits:

Features Advantages and Potential Benefits
Outstanding high temperature and low temperature performance Wide application temperature range, from -40ºC to 150°C with excellent protection at high temperatures and low torque, easy start-up at low temperatures
Excellent protection against wear, rust and corrosion, including acidic water Reduced downtime and maintenance costs because of reduced wear, rust and corrosion even in acidic and alkaline water environments
Excellent structural stability and oxidation resistance Extended service life with longer intervals between relubrication and improved bearing life
Excellent wear protection under heavy loads, slow speeds, and high temperatures Outstanding protection of slow speed, heavily loaded bearings, with extended bearing life
Outstanding structural stability in the presence of water Retains excellent grease performance in hostile aqueous environments
Low volatility Helps resist viscosity increase at high temperatures to maximize relubrication intervals and bearing life

Application Considerations: While Mobilith SHC PM greases are compatible with most mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobilith SHC PM greases, it should be thoroughly cleaned out to achieve the maximum performance benefits. If dismantling the system for cleaning before changeover isn't feasible, then thorough purging and increased relubrication intervals are strongly recommended. Contact your local ExxonMobil Lube Engineer for consultation on this approach.

Mobilith SHC PM greases are recommended for critical rolling element bearing applications in paper machines. Included among these are:

  • Wet end paper machine bearings.
  • Highly loaded press section bearings.
  • High-temperature felt roll and calendar stack bearings.
Mobilith SHC PM Series meets or exceeds the requirements of: PM 220 PM 460
DIN 51825: (2004-06) KPHC1-2N-40 KPHC1-2N-40
Mobilith SHC PM 220 PM 460
NLGI Grade 1.5 1.5
Thickener Type Lithium Complex Lithium Complex
Color, Visual Off-White Off-White
Penetration, Worked, 25o C, ASTM D 217 305 305
Dropping Point. oC, ASTM D 2265 275 275
Viscosity of Oil, ASTM D 445, cSt @ 40o C 220 460
4-Ball Wear, ASTMD 2266, Scar, mm 0.5 0.5
4-Ball Weld Load, ASTM D 2596, kg 250 250
Timken OK Load, ASTM D 2509, lbs 65 65
Roll Stability, ASTM D 1831, % Change -5 to +5 -5 to +5
Water Washout, ASTM D 1264, 79o C, % Loss 2 3
Rust Test, ASTM D 1743, Rating PASS PASS
Copper Corrosion, ASTM D 4048, Rating 1A 1A
EMCOR Rust Test, ASTM D 6138, Distilled Water, Rating 0/0 0/0
EMCOR Rust Test, ASTMD 6138, Acid Water pH 4.5, Rating 0/0 0/0
EMCOR Rust Test, ASTM D 6138, Alkaline Water pH 12.0, Rating 0/0 0/0
Oil Separation, ASTM D 1742, 0.25 psi, 24 hours @ 25o C, % Wt. Loss 3 3
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!