Mobil SHC Grease 460 WT (Case - 10 Tubes)
Mobil SHC Grease 460 WT is an ISO VG 460 high performance grease that is an ideal choice for wind turbine applications where temperatures are extreme. It is a synthetic grease with a lithium complex thickener and is wax free, giving it excellent low temperature pumpability and very low starting and running torque. It also provides superior adhesion and resistance to water, and is structurally and chemically stable. The additive combination in the grease provides excellent protection against wear, rust and corrosion at high and low temperatures.
Mobil SHC Grease 460 WT is the preferred fill product for many wind turbine builders and component suppliers. It was specially formulated to lubricate yaw, pitch and main bearings of wind turbines and has a reputation for exceptional quality and reliability that has been proven in over 10,000 wind turbines worldwide.
Features
The Mobil SHC™ brand of oils and greases are recognized and appreciated around the world for their innovation and outstanding performance. A key factor in the development of ExxonMobil´s products was the close contacts with key Original Equipment Manufacturers (OEMs) to ensure that our product offerings would provide exceptional performance in the continually evolving industrial equipment designs.
Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of Mobil SHC Grease 460 WT. Compared to conventional greases the benefits of this synthetic grease include longer grease life, enhanced false brinelling protection and bearing life, wide temperature range of application, and the potential for improved mechanical efficiency.
To combat severe application conditions proprietary synthetic base oils have been chosen for Mobil SHC Grease 460 WT because of their outstanding thermal/oxidative resistance potential. A state-of-the-art lithium complex thickener technology and specific additives help to enhance the performance of Mobil SHC Grease 460 WT offering the following features and benefits:
| Features | Advantages and Potential Benefits |
| Outstanding high temperature and low temperature performance compared to conventional greases | Wide application temperature ranges, with excellent protection at high temperatures and low torque, easy start-up at low temperatures |
| Superb thermal stability and oxidation resistance compared to conventional greases | Extended service life with longer intervals between relubrication and improved bearing life |
| Excellent protection against wear, rust and corrosion | Reduced downtime and maintenance costs |
| Excellent pumpability | Reliable lubrication of bearings using centralized grease systems or grease dispensers |
| Outstanding structural stability in the presence of water | Retains excellent grease performance in hostile aqueous environment |
| Low traction coefficient | Synthetic formulation delivers potential improved mechanical life and reduced energy costs versus conventional greases |
Applications
Mobil SHC Grease 460 WT is an NLGI 1.5 Grade extreme pressure grease with ISO VG 460 synthetic base fluid recommended for tough wind turbine applications. It provides outstanding bearing protection under heavy loads at low-to-moderate speeds and in applications where water resistance is a critical factor. Mobil SHC Grease 460 WT meets most specifications of wind turbine builder and component suppliers and has demonstrated outstanding performance in applications such as lubrication of yaw, pitch and main bearings either manual greased or using centralized grease systems or grease dispensers. The recommended operating temperature range is -30º C to 150ºC.
Specifications
| Mobil SHC Grease 460 WT meets or exceeds the requirements of: | |
| DIN 51825: (2004-06) | KPHC1-2N-30 |
Typical Properties
| Mobil SHC Grease 460 WT | |
| NLGI Grade | 1.5 |
| Thickener Type | Lithium Complex |
| Colour, Visual | Red |
| Penetration, Worked, 25ºC, ASTM D 217 | 305 |
| Dropping Point, ºC, ASTM D 2265 | 255 |
| Viscosity of Oil, ASTM D 445 cSt @ 40ºC | 460 |
| Timken OK Load, ASTM D 2509, lb. | 55 |
| 4-Ball Weld, ASTM D 2596, Load, Kg | 250 |
| Water Washout, ASTM D 1264, Loss at 79ºC. % wt | 10 |
| Rust Protection, ASTM D 6138, Distilled Water | 0,0 |
| Corrosion Protection, ASTM D 1743, Rating | Pass |
