Mobil SHC Cibus 32 (55 Gal. Drum)
Designed to resist thermal cracking and chemical oxidation, Mobil SHC Cibus 32 is a fully synthetic, high-performance heat transfer oil recommended for use in closed, indirect heating installations where NSF H1 registered lubricants are required. NSF H1 registered fluids are suitable for food and beverage processing and packaging applications where incidental food contact may occur. Product integrity is assured through independent verification. This product is suitable under kosher (parve) and halal dietary law, and is formulated to be free from gluten, nuts, wheat and animal products. Mobil SHC Cibus 32 also meets DIN 51522 heat transfer fluids requirements and testing. Mobil SHC Cibus 32 is ISO VG 32, with a viscosity index of 134. Mobil SHC Cibus 32 is carefully formulated to offer excellent heat transfer properties such as high thermal conductivity to provide rapid heat dissipation, boosting efficiency of the entire system.
The Mobil SHC brand of lubricants is recognised and appreciated around the world for innovation and outstanding performance. These molecular designed products based on synthetic materials symbolise the continuing commitment to use advanced technology to provide outstanding lubricant products. Not least among the benefits is the potential for efficiency improvements compared to mineral oils.
The Mobil SHC Cibus Series oils offer the following features and potential benefits.
| Features | Advantages and Potential Benefits |
| NSF H1 registered lubricants | Allows use in food and beverage packaging and processing applications |
| Manufactured in facilities that are ISO 22000 certified and registered to ISO 21469 | Product integrity assurance through independent verification. |
| High viscosity index | Maintains viscosity and film thickness at high temperatures to help protect equipment |
| Exceptional low temperature performance, including low power consumption at start-up | |
| High load carrying capability | Helps protect equipment and extend life |
| Minimizes unexpected downtime and extends service periods | |
| Good seal compatibility | Helps reduce potential oil leakage |
| Excellent oxidation stability | Provides long oil and helps extend equipment life |
| Excellent water separation and good corrosion protection | Helps prevent internal systems from corrosion even where large quantities of water are present |
| Maintains lubrication performance even after high pressure wash downs | |
| Meets a wide range of equipment requirements | Multi-service applications - One product can replace several |
| Helps minimize inventory requirements and reduces potential for product misapplication | |
| Low traction coefficient | Reduces overall friction and can increase efficiency in sliding mechanisms, with potential for reduced power consumption and lower steady-state operating temperatures |
Handling and Storage Recommendations
It is recommended that Mobil SHC Cibus lubricants should be stored inside and segregated from other non NSF H1 lubricants. Ideally, they should be stored in a clearly signed, separate, designated inside area. Drums and pails should not be stacked below or above other non NSF H1 lubricants. New packaging should be free from damage with an unbroken seal. Record the delivery date, batch number and expiration date. Record the date of initial seal breakage and use the contents in time by suitable stock rotation. Close all package openings after use. Do not replace unused oil in the container. Use clearly labeled dedicated equipment for internal transportation. Label machinery with the name of the correct NSF H1 lubricant where appropriate.
Lubricant Changeover
While the Mobil SHC Cibus Series may be physically compatible with other NSF H1 or non NSF H1 registered mineral oil based products, a mixture may detract from their performance and also from their registration status. Consequently it is recommended that before changing systems from non H1 lubricants to the Mobil SHC Cibus Series, or even for brand new equipment, the system should be thoroughly cleaned out and flushed to achieve the maximum performance benefits and to comply with H1 registration.
Applications
Mobil SHC Cibus Series lubricants are recommended for use in a wide variety of hydraulic, compressor, gear and bearing applications within food and beverage processing, packaging and pharmaceuticals. The products are effective in many applications including those where maintenance costs of component replacement, system cleaning and lubricant changes are high.
- Mobil SHC Cibus 32, 46 and 68 are high performance fluids intended for hydraulic, circulating, compressor and vacuum pump applications
- Mobil SHC Cibus 100, 150, 220, 320 and 460 are intended for gear, bearing and circulating systems
A suitable used oil analysis program, such as Signum from ExxonMobil, can help monitor the concentration of wear metals and provide information on appropriate actions.
Incidental Food Contact Only per FDA 21CFR 178.3570
Mobil SHC Cibus series lubricants are registered to the requirements of NSF H1 for incidental food contact only which means a limitation of 10ppm oil in food product per FDA 21CFR 178.3570. They are not to be used as direct food contact lubricants.
| Mobil SHC Cibus Series meets or exceeds the requirements of: | Mobil SHC Cibus 32 | Mobil SHC Cibus 46 | Mobil SHC Cibus 68 | Mobil SHC Cibus 100 | Mobil SHC Cibus 150 | Mobil SHC Cibus 220 | Mobil SHC Cibus 320 | Mobil SHC Cibus 460 |
| FDA 21 CFR 178.3570 | X | X | X | X | X | X | X | X |
| DIN 51506: 1985-09 | X | X | X | X | ||||
| DIN 51517-2: 2009-06 | X | |||||||
| DIN 51517-3: 2011-08 | X | X | X | X | ||||
| DIN 51524-2: 2006-09 | X | X | X | X |
| Mobil SHC Cibus Series meets performance test requirements of: | Mobil SHC Cibus 32 | Mobil SHC Cibus 46 | Mobil SHC Cibus 68 | Mobil SHC Cibus 100 | Mobil SHC Cibus 150 | Mobil SHC Cibus 220 | Mobil SHC Cibus 320 | Mobil SHC Cibus 460 |
| DIN 51506: 1985-09 | X | X | X | X |
| Mobil SHC Cibus Series is registered to the requirements of: | Mobil SHC Cibus 32 | Mobil SHC Cibus 46 | Mobil SHC Cibus 68 | Mobil SHC Cibus 100 | Mobil SHC Cibus 150 | Mobil SHC Cibus 220 | Mobil SHC Cibus 320 | Mobil SHC Cibus 460 |
| NSF H1 | X | X | X | X | X | X | X | X |
| NSF Registration Number | 141500 | 141498 | 141499 | 145255 | 141502 | 141503 | 141505 | 141501 |
| Kosher | X | X | X | X | X | X | X | X |
| Halal | X | X | X | X | X | X | X | X |
| Mobil SHC Cibus Series | Mobil SHC Cibus 32 | Mobil SHC Cibus 46 | Mobil SHC Cibus 68 | Mobil SHC Cibus 100 | Mobil SHC Cibus 150 | Mobil SHC Cibus 220 | Mobil SHC Cibus 320 | Mobil SHC Cibus 460 |
| ISO Grade | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 |
| Viscosity, ASTM D 445 | ||||||||
| cSt @ 40ºC | 30.7 | 46.4 | 67.5 | 100 | 162 | 222 | 311 | 458 |
| cSt @ 100ºC | 5.8 | 7.9 | 10.4 | 14.6 | 20.7 | 24.5 | 32.7 | 43.6 |
| Viscosity Index, ASTM D 2270 | 134 | 140 | 140 | 143 | 150 | 139 | 147 | 148 |
| Specific Gravity @ 15.6ºC, ASTM D 4052 | 0.843 | 0.846 | 0.851 | 0.839 | 0.843 | 0.843 | 0.854 | 0.856 |
| Copper Strip Corrosion, ASTM D 130 | 1B | 1B | 1B | 1A | 1A | 1B | 1B | 1B |
| Rust Characteristics Proc. A, ASTM D 665 | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Pour Point, ºC, ASTM D 97 | -51 | -50 | -47 | -45 | -21 | -24 | -42 | -42 |
| Flash Point, ºC, ASTM D 92 | 244 | 244 | 258 | 270 | 226 | 274 | 284 | 294 |
| FZG, DIN 51354, Fail Stage | >12 | >12 | >12 | 12 | ›13 | ›13 | ›13 | ›13 |
