Mobil SHC Aware EP2 Grease (5 Gal. Pail)

Mobil 120982

Mobil SHC Aware Grease EP 2 is a high-performance NLGI Grade 2 synthetic grease intended for marine applications such as rudder stocks, ATB notch interfaces, cranes and deck winches. Providing the optimum balance between the need for environmentally friendly grease and high-performance equipment lubrication, Mobil SHC Aware Grease EP 2 is suitable for environmentally sensitive applications, meeting the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP). This readily biodegradable, nontoxic grease is created from biodegradable saturated ester base oils and a lithium/calcium soap thickener. Mobil SHC Aware Grease EP 2 ensures superior bearing protection, defending equipment against corrosion and rust, and it performs consistently well at a wide range of temperatures. Mobil SHC Aware Grease EP 2 is engineered not to emulsify, and it offers excellent adhesion and water resistance, thus avoiding the need for frequent re-greasing.

Product Data Sheet

  • Meets requirements of US EPA 2013 VGP requirements for environmentally acceptable lubricants
  • Ready Biodegradability and Non-Toxicity reduces potential for environmental impact and potentially lowers remediation and clean-up costs caused by spills or leakage
  • Excellent adhesion and water resistance, resists water washout, avoiding need for frequent re-greasing
  • Excellent rust and corrosion protection, excellent bearing protection in wet conditions
  • Recommended working temperature is from -25°C to +125°C
  • Rudder stocks
  • ATB notch interfaces
  • Cranes
  • Deck winches
  • General grease points
Mobil SHC Aware Grease EP 2
NLGI Grade 2
Thickener Type Calcium/Lithium
Color, Visual Amber
ISO Viscosity Grade of Oil 150
Dropping Point, ASTM D 2265, ºC >160
Worked Penetration, ASTM D 217, mm/10 @ 25 °C 280
Water Washout @ 79 ºC, ASTM D 1264, wt% 7
EMCOR Bearing Corrosion in Distilled Water, ASTM D 6138, Rating 0,0
Copper Corrosion, ASTM D 4048, Rating 1b
Four Ball Weld, ASTM D 2596, kgf 400
Four Ball Load Wear Index, ASTM D 2596, kgf 65
Biodegradability of ester base oil, OECD 301B, wt% >60
Aquatic Toxicity,
OECD 201, 72h EC50
Bioaccumulation, OECD 117,
Partition Coefficient, log KOW
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!