Mobil SHC 824 (5 Gal. Pail)

SKU
XOM100929
$267.35
100929 https://d2706ruq7qkfdn.cloudfront.net/media/catalog/product/cache/8edfb821581a58e3a857c2776d875bc7/m/o/mobil_shc_824_pail.jpg

ISO VG 32 Mobil SHC 824 turbine oil is engineered to meet the severe demands of industrial gas turbine and ancillary equipment applications, with a nominal 10,000-hour Turbine Oil Oxidation Stability Test (TOST) life. This product is recommended for use in land-based stationary gas turbines, especially with units under 3,000 hp that are used as standby power units, industrial gas turbines operating in low ambient and remote areas, and in some types of total energy and combined cycle (gas/steam) systems. Formulated with synthesized hydrocarbons and a unique additive system, Mobil SHC 824 offers exceptional degradation resistance at high temperatures, as well as superior low-temperature fluidity. The naturally high viscosity index of Mobil SHC 824 results in enhanced equipment protection at high temperatures. This product effectively defends against rust and corrosion, with excellent air release performance and resistance to foaming.

Product Data Sheet

The Mobil SHC brand of lubricants are recognised and appreciated around the world for their innovation and outstanding performance. These Mobil SHC synthetic products, pioneered by our research scientists, symbolise the continuing commitment to using advanced technology to provide outstanding products. Mobil brand products have also been the choice for turbine operators worldwide since they were first commercialized more than one hundred years ago. During that period our technical experts have stayed in close contact with OEMs to ensure that our product offerings would provide exceptional performance in the continually evolving turbine equipment designs. Familiarity with evolving designs and operational conditions is a key input to the application of the best lubricant technology in the development of products that will provide the performance demanded by users.

One general trend over the years has been to higher power output designs, which can lead to greater thermal stress of the lubricant. This thermal exposure is exacerbated by cycling operation which is employed by gas turbine operators to manage the supply/demand balance of electrical power generation, which results in heat soak-back at each shut-down sequence. Resisting thermal degradation is thus a key property required of a modern gas turbine oil lubricant.

To combat high thermal exposure of the oil, our product formulation scientists chose proprietary synthetic base oils for Mobil SHC 800 Series oils because of their exceptional thermal/oxidative resistance capabilities. Our formulators chose specific additives that would maximize the benefits of the synthetic base oils to provide exceptional oil life and deposit control and resistance to thermal and chemical degradation, as well as the balance of the performance features. The synthetic base oil also provides outstanding low temperature fluidity characteristics unmatched by mineral turbine oils and is a key benefit for remote, low temperature ambient applications. Among the numerous benefits and features of Mobil SHC 800 are:

Features Advantages and Potential Benefits
Outstanding high thermal/oxidative stability and deposit control High level of resistance to heat soak-back after turbine shutdown
Less deposit build-up and improved reliability and lower maintenance costs
Long oil charge life and lower product costs
Excellent low temperature fluidity Reliable flow and lubrication during cold starts, even at very low temperatures
Naturally high Viscosity Index Improved equipment protection at high temperatures
Very good resistance to foaming and good air release Efficient system operation and less un-planned stoppages
Excellent antiwear performance Excellent equipment protection and reduced equipment replacement costs

Mobil SHC 800 Series turbine oils are designed specifically to meet the needs of the most severe industrial gas turbine applications and ancillary equipment. Specific applications include:

  • Severe stationary gas turbine applications, particularly units under 3,000hp, for stand-by power generation
  • Industrial gas turbines operating in low ambient and remote areas
  • Total energy systems
Mobil SHC 800 Series has the following builder approvals: 824 825
Siemens TLV 9013 04 X X
MHI MS04-MA-CL003 X  

 

Mobil SHC 800 Series meets or exceeds the requirements of: 824 825
Solar ES 9-224, Class I X X
GE GEK 32568J X  

 

Mobil SHC 800 Series is recommended by ExxonMobil for use in applications requiring: 824 825
GE GEK 101941A X  
GE GEK 28143B X  
Mobil SHC 800 Series 824 825
ISO Viscosity Grade 32 46
Viscosity, ASTM D 445    
cSt @ 40ºC 31.5 43.9
cSt @ 100ºC 5.9 7.9
Viscosity Index, ASTM D 2270 135 145
Pour Point, ºC, ASTM D 97 ‹-54 -45
Flash Point, ºC, ASTM D 92 248 248
Specific Gravity @15ºC kg/l, ASTM D 4052 0.83 0.83
TOST life, ASTM D 943, hrs to 2NN 9500 9500
Foam Test, ASTM D 892, Seq I, Tendency/Stability, ml/ml 10/0 20/0
Air Release 1 1
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!