Mobil Delvac 1 Gear Oil 75w90 (5 Gal. Pail)

SKU
XOM122047
$168.61
Mobil 122047 https://d2706ruq7qkfdn.cloudfront.net/media/catalog/product/cache/image/265x265/dd2dbd78acb262d17201d02bb7ab5f93/m/_/m_delvac_1_75w-90_sgo_5gal_pail_05-27-14.png

Mobil Delvac 1 Gear Oil 75W-90 is a fully synthetic drivetrain lubricant engineered to meet very demanding extended drain and warranty requirements. This product is designed for use in heavy-duty drivetrains that require gear lubricants with excellent load-carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac 1 Gear Oil 75W-90 incorporates synthetic basestock and advanced additives providing significant advantages over conventional gear oils.

The state-of-the-art technology in Mobil Delvac 1 Gear Oil 75W-90 delivers excellent performance, helps to protect against thermal degradation and oxidation, contributes to reduced wear and corrosion, improved shear stability and extended service capability.

Product Data Sheet

Today's technology has vastly improved the performance capabilities of heavy-duty on and off-highway equipment load, torque, speed, and control through innovative drivetrain designs. These designs have changed and increased the requirements of lubricants to deliver this higher level of performance, increase productivity, and reduce operating costs. For heavy-duty final drives, friction control, wear protection, thermal stability, shear stability, rust and corrosion prevention, and seal protection are features that must be optimally balanced to contribute to extended gear and seal life, smooth operation, improved fuel economy potential and high load high torque capability over a wide range of applications. The key benefits of Mobil Delvac 1 Gear Oil 75W-90 include:

Features Potential Benefits
Exceptional thermal stability and resistance to high temperature oxidation Long gear and bearing life due to minimal deposits
Long seal life
Outstanding protection against low speed/high torque wear and high speed scoring Increased load-carrying capability.
Helps to reduce maintenance costs and long equipment life
Exceptional shear stability Helps to retain viscosity and film strength under severe operating conditions to prevent wear
Enhanced friction reduction properties Has potential for fuel economy and reduce operating costs
Outstanding low temperature fluidity versus conventional oils Helps to Reduce wear and ease of start-up
Good resistance to foaming Helps to maintain film strength for reliable lubrication
Compatible with typical automotive seals and gaskets Minimum leakage and reduced contamination
  • Heavy duty non-synchronized manual transmissions, axles and final drives requiring API GL-5 and MT-1 performance
  • On-highway light and heavy duty trucks, busses and vans
  • Off-highway industries including: construction, mining, quarrying, and agriculture
  • Other heavy-duty industrial gear drives including hypoid and worm gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail
  • Mobil Delvac 1 Gear Oil 75W-90 is intended for initial fill, topping-off or refilling differentials, final drives and transfer cases
  • Recommended for equipment such as winch reduction gears and crawler vehicle propulsion gear drives that are exposed to severe low temperatures
  • Recommended where extended service intervals and warranties are required
  • Not recommended for applications requiring API GL-4 level performance
  • Not intended for automatic, manual or semiautomatic transmissions for which engine oil or automatic transmission fluids are recommended
Mobil Delvac 1 Gear Oil 75W-90 meets or exceeds the requirements of: 
API GL-5/MT-1 X
Scania ST0 1:0 X
ISUZU Axle Oil X
ISUZU LCV Front Axle Oil X
ISUZU Large Manual Transmission Oil X
Meritor 0-76-N X
BOSCH TE-ML 08 X

 

Mobil Delvac 1 Gear Oil 75W-90 has the following builder approvals: 
Volvo 97312 X
SAE J2360 X
Dana SHAES 256 Rev C / 429 X
Detroit Fluids Specification 93K219.01 X
Mack GO-J Plus X
MAN 342 Typ M2 X
MB-Approval 235.8 X
VOITH TURBO 132.00374401 / 132.00374402 X
ZF TE-ML 05B / 12L /  12N / 16F / 17B/ 19C / 21B X
SCANIA STO 2:0 A X

SCANIA STO 2:0 A FS

X
Navistar MPAPS B-6821 X
Hyundai Dymos P1105S Axle - Low Floor Rear Axel X
Flender Railway Gears T7302 X

 

Mobil Delvac 1 Gear Oil 75W-90 is recommended by ExxonMobil for use in applications requiring: 
Eaton PS 163  X
MIL-PRF-2105E X
Mobil Delvac 1 Gear Oil 75W-90 
SAE Grade 75W-90
Viscosity, ASTM D 445  
cSt @ 40ºC 120
cSt @ 100ºC 15.9
Viscosity Index, ASTM D 2270 140
Pour Point, ºC, ASTM D 97 -48
Flash Point, ºC, ASTM D 92 205
Density @ 15ºC kg/l, ASTM D 4052 0.86
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 7 answers
Why did you choose this?
The Lubricant Store Store
It fits the specs for my RV and I trust Mobile Synthetic
Bruce L on Oct 14, 2018
Mobil oil name
Gary H on Aug 4, 2018
It fits the specs for my RV and I trust Mobile Synthetic
Bruce L on Oct 14, 2018
All I’ll use are Mobil products.
Troy F on Aug 31, 2018
Mobil oil name
Gary H on Aug 4, 2018
good price for item i wanted
RON H on Apr 20, 2018
Best product for tractor front gearboxes.
Bobby J on Apr 10, 2018
Boxster Race Cars
Christopher M on Feb 28, 2018
All I’ll use are Mobil products.
Troy F on Aug 31, 2018
good price for item i wanted
RON H on Apr 20, 2018
Difference between delvac vs Mobil 1 75W-90 Synthetic Gear Lube vs Mobil 1 LS 75W-90 Synthetic Gear Lube ?
jonathan b on Aug 25, 2018
BEST ANSWER: The LS oil is for limited slip differentials, however, both can be used where an API GL-5 application is required but cannot use where a API GL-4 is required. Delvac 1 cannot be used in a limited slip differential but the LS oil can be used in standard differential and it won't be harmed.