Mobil Unirex EP 2 (Case - 10 Tubes)
Exxon (now Mobil) Unirex EP 2 is an NLGI Grade 2 premium lithium complex thickened multipurpose grease. It is suitable for service in a variety of automotive, commercial and industrial applications. Unirex EP 2 is certified against NLGI service classification GC-LB for wheel bearings and chassis lubrication. Exxon Unirex EP 2 is formulated to provide excellent adhesion, water wash-out resistance, mechanical stability and high temperature performance. Even after prolonged churning with water, Unirex EP 2 retains its consistency, adhesive and rust inhibiting properties. Unirex EP 2 provides good protection against corrosion and provides excellent extreme pressure protection against wear, even under severe shock loading conditions.
Unirex EP 2 is an excellent choice for a variety of applications and can be useful in reducing excessive grease inventories.
|Features||Advantages and Potential Benefits|
|Formulated using an advanced lithium complex soap thickener||Enables longer grease life at higher temperatures than possible with greases made with most other soap types.|
|Excellent EP and anti-wear properties||Equipment protection and potential equipment life extension even in severe operating conditions.|
|Potent corrosion protection||Guarding equipment against rust and corrosion in heavy duty and automotive applications.|
|Excellent resistance to water washout and spray-off||Uses new polymer technology. This enhances the product’s already excellent adhesion tendency and water washout resistance. Ensures proper lubrication and protection even in hostile wet environments.|
|Certified against NLGI service classification GC-LB||One grease for wheel bearings and chassis lubrication as demonstrated against all NLGI GC-LB performance tests.|
Unirex EP 2 is an excellent multipurpose grease for heavy-duty service in both Automotive and Industrial applications. Its excellent water resistance and extreme-pressure protection exceed the performance levels of conventional multi-purpose light-to-medium-duty greases.
Unirex EP 2 exceeds the requirements of the ASTM D 4950 GC-LB grease classification for automotive wheel bearing and chassis applications.
Unirex EP 2 is particularly well-suited for general purpose anti-friction bearings operating at high temperatures. In addition, its low oil-bleed properties offer a distinct advantage where minimal leakage is critical.
|Unirex EP 2 meets or exceeds the requirements of:|
|Unirex EP 2|
|Thickener Type||Li-Complex + Polymer|
|Penetration, Worked, 25ºC, ASTM D 217||280|
|Dropping Point, ºC, ASTM D 2265||260 (min)|
|Viscosity of Oil, ASTM D 445|
|cSt @ 40ºC||220|
|Penetration, ASTM D 217, Change from 60X to 100,000X, mm/10||+30|
|Timken OK Load, ASTM D 2509, lb||60|
|Corrosion Prevention, ASTM D 1743||Pass|
|Oxidation Stability, ASTM D 942, Pressure drop at 100 hr, kPa||1|
|Wheel Bearing Leakage, ASTM D 4290, g||1.3|
|4 Ball Wear, ASTM D 2266, scar dia, mm||0.47|
|4 Ball EP, ASTM D 2596, weld load, kg||315|
|EMCOR Rust Test, ASTM D 6138, 20% SSW, rating||0,0|
|Water Spray-Off, ASTM D 4049, wt %||30|
|Water Washout, ASTM D1264, wt %||2.1|